About Sound engine
And it does a good job. The speaker comes with the bug, and installs in the roof. (got to make a small slice in the cab for speaker) mount the sound chip in the front of the motor box. I know, some will say "but that's a diesel sound" OK so it is , but with some research I found the gas engine wasn't all that good and when the gas engine got tired and needed to be replaced most owners put in the "Caterpillar" D17000 engine a non supercharged engine. and it worked very well.If you want the gas engine sound then maybe the "Lok Sound" with the "Galloping Goose" sound, and I believe you can get that chip in a micro-size as well. I have the whole picture spread when I did the install and you are more than welcome to get hold of me so I can email you the file.I hope that helps and good luck with your quest.Cheers,Wes aka smokinporter I used a LokSound 3.5 decoder (full-size) because they had a pre-programmed sound for a side-rod Diesel, where you can hear the clanking. The advantage of the LokSound is that there is no capacitor to try to locate, and the decoder is thinner than the Tsunami. No need to spend the extra dollars for a mini-version.Anyways, that decoder's speaker is a good fit when affixed to the inside of the radiator grille. There is sufficient room to glue the decoder above the motor against the shell. I drilled/cut out the plastic grille and replaced it with brass screen wire from Clover House. No need for a sound box as the shell accomplishes that. Sound goes out the front, back pressure goes out the bottom through the drivers.As sound installations go, this was a simple one
Key features of the Sound engine that are enabled through these drivers include:
- Secrets Of The Mix Engineers: Mike Crossey - Sound On Sound
- GAUDIO STUDIO Sound Separation Tips - A Sound Engineer's
- Sonar: Audio Engine Tune-Up - Sound On Sound
- Sound Guy, Sound Man, Audio Engineer which is it? :
- Sound Guy, Sound Man, Audio Engineer which is it?
- Fire Engine Sound Effect Ringtone (European) by Fire Engine
- Cheat-Engine/README.md at master sound-infinity/Cheat-Engine
Packet Engine It is a special Windows utility for amateur radio packet users that interfaces multiple packet programs and multiple TNCs (Terminal Node Controllers) / modems. You can use any SoundCard as Dual Port TNC for Packet. View details Download Buy Now It is a special Windows utility for amateur radio packet users that interfaces multiple packet programs and multiple TNCs (Terminal Node Controllers) / modems. lets one TNC be used by more than one packet program lets one packet program use more than one TNC lets your sound card be used as a physical TNC or modem -- no need to buy a TNC Packet Engine Pro will only work with packet programs that have been written to take advantage of AGWPE but there are many, including terminal, DX cluster, APRS, and digipeater programs. Packet Engine Pro requires a $49 USD fee after a free 30 day trial, but it includes many features, including some that are not and will not be found in the basic AGWPE. Key features of Packet Engine Pro An easy-to-use visual interface including: A 'Radio Port Manager' to quickly see and adjust settings for your TNC or sound card Numerous 'Views' to quickly see Radio port status; Connected packet stations; Connected programs;and 'Heard' stations. A TNC/Sound Card setup 'Wizard' to simplify radio port configurations, including "auto detect and set" of serial ports and sound cards. Compatibility with most TNCs and packet modems, both external and internal Provision for auto control of TNC settings such as MaxFrame, Retries, SlotTime/Persist. access to Packet Engine Pro over the internet or a local area network. Sound Card modem features that include: "On Air" baud rates of 300, 1200, 2400, and 9600. 300 baud HF modem compatibility for both KAM (1600/1800 pair tones) and PK-232 (2110/2310 pair tone). a Sound Card Tuning Aid with Sine Wave, Waterfall, Eye Scatter, and Frequency Spectrum displays. provision for using multiple sound cards (lets you add 2nd card for packet while 1st card works with non-packet programs). provision for connecting 2 radios to each sound card. PTT (transmit) control by either serial port or printer port. an improved Sound Card DSP modem that 'hears' even better than AGWPE. a sound card timing 'Equalization' feature to let you tune your particular Sound Card for even better performance. input and output volume control from within the program. Auto loading of packet applications after Packet Engine Pro starts An 'auto update' feature that checks for and installs program updates New HF 300b Packet Modem
