About Ctd time
Equivalent of bbbb 2. Raw conductivity frequency = sqrt(C * 303 + 6250000) Voltage: 1. V = decimal equivalent of uuu, vvv, xxx, or yyy 2. Volts = V / 819; Pressure: 1. P = decimal equivalent of bits 0 through 13 of pppp. Bit 14 is the sign bit. If bit 14 is 0 the number is positive, if it is 1 the number is negative. Page 25 scan 119 (Low frequency reference) xx = FF rrrrrr = 0B4580, Reflow = 2885.500 pppp = 8EA4, P = 3748, pressure number = 3748 scan 120 (CTD): aaaa = 69CE, T = 27086, temperature frequency = 3543.177 bbbb = 431E, C = 17182, conductivity frequency = 7488.511 pppp = 0EA5, P = 3749, pressure number = 3749 The reference data is used to compute the corrected temperature and conductivity frequencies. Page 26: 2-3.1.2 Paroscientific Digiquartz Pressure Sensor 2-3.1.2 PAROSCIENTIFIC DIGIQUARTZ PRESSURE SENSOR 18 ASCII HEX characters representing 9 bytes are stored per CTD scan. A carriage return line feed follows the data from the last CTD scan. The data format for CTD scans is : aaaabbbbppppppcccc aaaa = four HEX characters representing 2 bytes of temperature data bbbb = four HEX characters representing 2 bytes of conductivity data pppppp = six HEX characters representing 3 bytes of Digiquartz pressure data cccc = four HEX characters representing 2 bytes of pressure temperature data... Page 27: 2-3.2 Moored Mode 2-3.2 MOORED MODE Moored mode temperature and conductivity data are stored as corrected frequencies. The reference information is not stored with the data. Otherwise, the data format is the same as profiling mode except for the conversion of temperature and standard range conductivity from hexadecimal numbers to decimal frequencies. Page 28: Operation Using Term19 OPERATION USING TERM19 TERM19 is a terminal emulation program designed to communicate with SEACAT Profiler: characters typed on the keyboard are sent to SEACAT Profiler and characters sent by SEACAT Profiler are displayed on the console. TERM19 expects to find the file TERM19.CFG in the current directory. SEACAT Profiler will automatically send ^S and ^Q characters if the computer does
Key features of the Ctd time that are enabled through these drivers include:
- REQUIEM: Random CTDs caused by
- Time Series Composite CTD Profiles from R/V Hermano Gin s
- skyrim CTD every single time even without mods : r/skyrim - Reddit
- My fix to CTD on save bug for SSE and long save/load times in SSE
- PPT – ICH and CTD PowerPoint presentation
- Overview of Common Technical Document (CTD)
- CTD Tiles Wall Floor Tiles
Give me a performance boost?A: The question was very detailed explained here: How to understand do I need the patch or not?A: If you have installed several thousands of animations another bunch of new anims may break your game in a state where you'll always get CTD on loading or starting a new game. In that case the patch will help you to cure the CTD. If you have no installed animations by FNIS you can try the patch just for performance purpose.Q: What's the difference between the patch and SSE Engine Fixes?A: SSE Engine Fixes changes movsx -> movzx instruction, what doubles the existen limit of numStaticNodes. A crash or unpredicted behavior still may happen when you will have more than 65535 numStaticNodes (instead of 32767) using the Engine Fixes solution.This patch always put 0 instead of incorrect value to the numStaticNodes register, what always helps to cure the CTD and frees CPU from additional work.Q: I'm getting "does not appear to be an SKSE plugin" message in skse64.log, is it okay?A: Yes, it's okay, just ignore it. The message notifies that the plugin was loaded not through SKSE64 API, but classical way with dllmain. I didn't find yet a proper solution to attach the plugin through the classical SKSE API for 64-bit version.Q: Will the patch work with 1.5.XX runtime version?A: I have personally tested its work on 1.5.73, 1.5.80 and 1.5.97 versions, everything works good. If you have a different runtime version you can just try it, it's safe. In case of incompatibility you'll get an appropriate message.Q: But the limit still exists in FNIS?A: Please, check the article for better understanding of animation limits: I'm getting "Multiple segments found" error on game startup, what should I do?A: It means several equal places was found by pattern
